and＂CNC INSERT TOOL＂Relevant content：
Find the relevant results for you about67
Tool materials should have basic propertiesThe selection of tool materials has a great impact on tool life, processing efficiency, processing quality ...
time：2024-01-05 16:13:43 clicks：915
17. When turning a slender shaft, what are the benefits of using reverse feed instead of forward feed?Answer: Under normal circumstances, slender obje...
time：2023-12-29 17:46:09 clicks：976
13. When processing workpieces on lathe faceplate angle iron, it is necessary to meet the position tolerance (parallelism, verticality) requirements.W...
time：2023-12-29 17:44:52 clicks：961
9. In order to improve tool life, how should the cutting amount be selected?Answer: Among the cutting quantities, cutting speed has the greatest impac...
time：2023-12-29 16:30:25 clicks：961
5. How to prevent deformation when clamping deformed workpieces?Answer: (1) The angle iron must have a certain degree of rigidity; (2) The positioning...
time：2023-12-29 11:43:10 clicks：965
1. What are the causes of deformation and vibration when turning a slender shaft? What solutions can be taken? Answer: When turning a slender shaft, t...
time：2023-12-29 11:31:01 clicks：942
9. Thermal cracks. Fine lines perpendicular to the cutting edge, causing damage to the cutting edge.Reason 1. Rapid temperature change. Solution: Choo...
time：2023-12-22 11:08:02 clicks：971
5. Built-up edge. Built-up edge leads to poor machining finish, and when the built-up edge falls off, it causes edge cracks.Reason 1. Cutting speed is...
time：2023-12-22 11:06:30 clicks：988
1. Flank surface wear. The flank surface wears too quickly, the finish is poor, and the dimensions are out of tolerance.Reason 1. The cutting speed is...
time：2023-12-22 11:01:10 clicks：973
9. The blade is broken. Not only does it damage the blade. It will also damage the tool pad, cutterhead and workpiece.Reason 1. The hardness of the wo...
time：2023-12-22 10:26:36 clicks：974
